Tactical Scorpion Gear AR500 Steel Shooting Target Bear 14 x 9 x 3/8" Laser Cut Gong

Tactical Scorpion Gear AR500 One 14″x 9″ x 3/8″ Bear steel shooting target

Two 1/2″ mounting holes ( With thick ears to take hits without breaking)
Hang from both holes for more stability but you can hang from a single hole

We utilize a CNC laser cutting table for the cutting of all our AR500 products.

Plasma cutting cuts slowly, this puts a lot of heat into the steel. ( Submerged plasma cutting machine is no better) This excess heat can result in excessive chipping and damage near the cut edge during use and easily shattering when shot. Plasma cutting generates large amounts of heat that is deposited into the target, softening it’s edges. The heat-affected zone (HAZ) generated by plasma cutting is the largest out of the most commonly used methods for cutting abrasion resistant steel. Most AR500 is cut with plasma cutters as they are cheap and relatively small compared to other methods.

Superior Material : AR500 3/8″ steel with 477 – 550 BHN
Minimum surface hardness of 477 BHN. Core hardness 450 min BHN

3/8″ AR500 steel targets work great for the following calibers 223, 5.56, 5.45×39, 7.62×39 and 308. . .

All targets are raw and unfinished

All of our 3/8″ targets carry a limited lifetime guarantee from breakage

Part number: TSG-GGBEAR
Package Contents: One Bear Ar500 steel Gong Target
Weight: 16 pounds

3/8” AR500 steel targets work great for the following calibers

• 0.30-30 – 100 yards
• 7.62 ,0.308, 0.30-06 – 150 yards
• 0.207 win,0.223, 5.56 – 200 yards

Do not use XM-855 Green tip, M193 or steel core while shooting at steel targets as it can be dangerous and will also void your warranty as can be easily identified as being shot with these projectiles.

 For velocities over 3000fps MV use at 200 yards minimum. Handguns should be used no closer than 10 yards and rifles 100 yards. All of our 3/8″ targets carry a limited lifetime guarantee from breakage.

Two 1/2″ with thick ears to take hits without breaking. Hang Gong from both holes for more stability but you can hang from a single hole.All targets are raw and unfinished.