{"product_id":"at3-midwest-industries-single-stage-3-5-lb-trigger","title":"Midwest Industries Single Stage 3.5 Lb Trigger for AR-15\/AR-10","description":"\u003ch2 style=\"text-align: center;\"\u003e3.5 Pound Drop-in Trigger with Anti-Walk Pins\u003c\/h2\u003e\n\u003cp\u003eThis is a fully-featured drop-in replacement trigger for your AR-15 or AR-10 platform rifle.  This trigger has an ultra-crisp 3.5 lb pull, which is excellent for both accuracy and speed when firing.  The trigger reset is quick, with very low overtravel for follow-up shots.  And you have your choice of a traditional curved trigger, or a more modern flat-face design.\u003c\/p\u003e\n\u003cp\u003eThe casette-style housing is anodized aluminum, with hardened S7 tool steel hammer, disconnector, and trigger inside.  Proudly made in the USA, every piece comes together to make this trigger shine.  And it’s a true drop-in part, with included anti-walk pins and screws to ensure installation is simple and secure.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLightened hammer and trigger pull (3.5-lb pull weight)\u003c\/li\u003e\n\u003cli\u003eMore accurate shooting with less effort\u003c\/li\u003e\n\u003cli\u003eUltra-smooth break with a crisp, clean release\u003c\/li\u003e\n\u003cli\u003eFits small (standard) pin size (.154″)\u003c\/li\u003e\n\u003cli\u003eQuick reset and low overtravel for enhanced speed\u003c\/li\u003e\n\u003cli\u003eDrop safety feature\u003c\/li\u003e\n\u003cli\u003eSelf-contained design makes it easy and quick to install with no fine-tuning needed\u003c\/li\u003e\n\u003cli\u003eFits most .308 and .223 AR style platforms\u003c\/li\u003e\n\u003cli\u003eAnti-walk pins and screws included\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eMI Limited Lifetime Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePull Weight: 3.5 lb\u003c\/li\u003e\n\u003cli\u003eInterior Material: Hardened S7 Tool Steel\u003c\/li\u003e\n\u003cli\u003eInterior Finish: Nitride\u003c\/li\u003e\n\u003cli\u003eHousing Material: Aluminum\u003c\/li\u003e\n\u003cli\u003eHousing Finish: Hard Coat Anodized\u003c\/li\u003e\n\u003cli\u003eWeight: 2.4 oz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eNOT FOLLOWING THESE INSTRUCTIONS WILL RESULT IN WARRANTY BEING VOID. MIDWEST INDUSTRIES IS NOT RESPONSIBLE FOR DAMAGE DONE TO FIREARM DURING INSTALLATION.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSTEP 1\u003c\/b\u003e\u003cbr\u003e\nMake sure the weapon is clear and there is not a round in the chamber. REPEAT THIS STEP. Remove the upper receiver from the weapon system.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSTEP 2\u003c\/b\u003e\u003cbr\u003e\nLoosen the grip screw on the inside of the grip and remove it. It may be a flathead, torx head, or hex head, depending on the manufacturer. Carefully remove the grip to expose the spring inside. There is a detent behind the spring. Both of these are small and easily lost. Remove the spring and detent, using your hand or a plastic bin to catch the detent as it falls. Save them for reinstallation (Step 7).\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSTEP 3\u003c\/b\u003e\u003cbr\u003e\nWith a small brass punch or nonmetallic item (to avoid damage to the finish), press out the hammer pin and remove the hammer and hammer spring.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSTEP 4\u003c\/b\u003e\u003cbr\u003e\nNext, press out the trigger pin. This may require pressing down on the disconnector. Remove the disconnector, disconnector spring, trigger, and trigger spring. Now remove the safety selector if it did not come out earlier. The pocket that everything was in should now be clear and empty.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSTEP 5\u003c\/b\u003e\u003cbr\u003e\nDrop the Midwest Industries trigger in the pocket using the holes as a reference for direction. The hammer will face the magwell.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSTEP 6\u003c\/b\u003e\u003cbr\u003e\nInstall anti-walk pins with included wrench and screws.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSTEP 7\u003c\/b\u003e\u003cbr\u003e\nReinstall the safety selector and the grip assembly with the detent, detent spring, grip, and grip screw to their respective positions in that order.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSTEP 8\u003cbr\u003e\n\u003c\/b\u003eThere are two small setscrews located on the trigger system under the hammer springs. Lift or shift over each hammer spring and use a 5\/64 Allen wrench to snug the setscrews to the floor of the receiver. Do not over-tighten, as this will change the poundage of the trigger.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDO NOT TIGHTEN OR LOOSEN THE MAIN SETSCREW (LOCATED IN THE CENTER). THIS HAS ANOTHER FUNCTION AND IS NOT TO BE CHANGED BY THE OPERATOR. SEEK A COMPETENT GUNSMITH IF\u003c\/b\u003e \u003cb\u003eCHANGES NEED TO BE MADE.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSTEP 9\u003c\/b\u003e\u003cbr\u003e\nPerform functions check on the weapon to verify correct installation.\u003c\/p\u003e","brand":"Midwest Industries","offers":[{"title":"Curved","offer_id":48150753575073,"sku":"MI-TRIGGER-C","price":142.76,"currency_code":"USD","in_stock":true},{"title":"Flat","offer_id":48150753607841,"sku":"MI-TRIGGER-F","price":167.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/8408\/1057\/files\/Midwest-Industries-Single-Stage-3.5-Lb-Trigger-AT3-Tactical.jpg?v=1792482936","url":"https:\/\/kilo1sixarms.shop\/products\/at3-midwest-industries-single-stage-3-5-lb-trigger","provider":"KILO 1 SIX ARMS","version":"1.0","type":"link"}